Home  /  Contact Us  /  Customer Service  /  Pond Products  /  On-line Store Front  /  Koi Purchase


 

Products               

Additives &Supplements     

Air pumps

Air Stones

Chiller

Filters

Filter Media

Heaters & Controller

Instruments & Materials

Lights & Bulbs

Maintenance 

Mist Generator 

Pond Products

Protein Skimmers

Pumps

Spot Light

Thermometer & Hydrometer

Tubings

UV Sterilizer

SEN INTERNAL POWER FILTER (IPF)

IPF 01 Internal Power Filter

  • Submersible Filter
  • Trouble Free
  • Quiet Reliable
  • Adjustable flow rate
  • Mechanical, biological, chemical filtration
  • Injection of Air
  • Ideal for saltwater, freshwater & pond
  • Limited one year warranty
  • Application: aquarium, pond, terrarium, foundation, water movement.
IPF 02 Internal Power Filter
  • Submersible Filter
  • Trouble Free
  • Quiet Reliable
  • Adjustable flow rate
  • Mechanical, biological, chemical filtration
  • Injection of Air
  • Ideal for saltwater, freshwater & pond
  • Limited one year warranty
  • Application: aquarium, pond, terrarium, foundation, water movement.

 

IPF 03 Internal Power Filter

  • Submersible Filter
  • Trouble Free
  • Quiet Reliable
  • Adjustable flow rate
  • Mechanical, biological, chemical filtration
  • Injection of Air
  • Ideal for saltwater, freshwater & pond
  • Limited one year warranty
  • Application: aquarium, pond, terrarium, foundation, water movement.
  • 115 volt / 60 hz
  • Power: 22 watt
  • Max Flow: 263 GPH
  • Max. Head: 6.3 Feet
  • Thermal protect device
  • Foam Filter: 3
  • Carbon: 1

 

SPECIFICATION
MODEL IPF 01 IPF 02 IPF 03
VOLT / HZ

115 Volt / 60 HZ

115 Volt / 60 HZ 115 Volt / 60 HZ
Power (watt) 2.9 watt 5.4 watt 22
MAX. flow (GPH) 65 75 263
Max. Head ( Feet) 2.3 3.8 6.3
Dimension (LxWxH) 1 1/2" x 1 3/4" x 5 1/4" 1 3/4" x 2 1/16" x 6 3/16" 31/8"x2 1/2"x115/8"
Cord length 6 feet 6 feet 6 feet
Thermal Protect device no no yes
Flow Control yes yes yes
Aeration Device yes yes yes
Filter combination
Filter combination Carbon 1 1 1
Foam Filter 1 1 3
INSTALLATION

SEN IPF series internal power filter can be placed in water in either a vertical or horizontal position according to the size of tank and water level.  IPF 01 & IPF 02 have a mounted suction cups at the bottom of pump. IPF 03 has a mounted suction cups with base plate at the bottom of pump.  If necessary to mount the filter, press four suction cups firmly against the aquarium glass.  Internal power filter unit must be submerged.  This internal power filter can be used for aquarium, pond, terrariums, fountain & water movement.

SAFETY INSTRUCTION

  1. Make sure that your electrical voltage is compatible with voltage printed on the filter label.
  2. always use a properly grounded electrical outlet
  3. To avoid electrical shock and/or electrical short, use a drip loop to prevent water travel along the power cord.
  4. Ensure pump is securely installed before operation.
  5. Pump should only be used with water.
  6. Do not operate a dry filter to avoid permanent damage.  The filter should always be used with water.
  7. Do not operate filter if it is damaged, malfunctioning, and/or if there is a problem with the power cord.
  8. Always unplug the filter from the electrical outlet when not in use, before replacing or cleaning parts.  Do not yank power cord to unplug it from the electrical outlet.
  9. Do not install or store pump where it can be exposed to extreme weather conditions or temperature below freezing.
  10. If an extension cord is necessary, use a cord with the proper rating.  A cord rated for less amperes or watts than the pump rating may result in overheating.
  11. Do not attempt to repair filter at home, if service is needed, return filter to an authorized service center for service.
Maintenance
Impeller
  1. Separate the motor unit from the filter part
  2. Gently remove impeller housing from the motor unit
  3. Pull out the magnet impeller
  4. Clean and wipe the magnet impeller to remove dirt, debris and deposits.  Do not use soap or other cleaning agents.
  5. Re-install the magnet impeller into shaft and impeller housing

Carbon Cartridge

It is recommended to replace carbon cartridge every month for a healthier aquarium.  This carbon cartridge unit is sealed and not refillable.  Carbon removes color, bad smell and dissolved organic matter.

Foam Filter

The foam filter combines the important functions of mechanical and biological filter.  This foam filter removes debris and suspended particles and will eventually be colonized by nitrifying bacteria.  This filter requires periodic cleaning to remove debris and particles for restoring its mechanical function.  Do not use hot water, soaps and disinfectants to clean foam filter.  It may kill or inactivate all the nitrifying bacteria and destroy the beneficial effects of biological filtration.  Rinse foam filter under a stream of tepid water.  It will not kill the bacteria present.

IPF 01 Part#

IPF 02 Part#

IPF 03 Part#

# Description Part Number
IPF 01 IPF 02 IPF 03
1 End Cover 01-1 02-1 03-1
2 Suction cup only 01-2 02-2 03-2
2-1 base plate only - - 03-2-1
3 pump main body 01-3 02-3 03-3
4 Impeller 01-4 02-4 03-4
5 Impeller Housing 01-5 02-5 03-5
6 Impeller housing holder 01-6 02-6 03-6
8 Carbon cartridge 01-8 02-8 03-8
9 Container for carbon cartridge - 02-9 03-9
10 Foam filter 01-10 02-10 03-10
11 Foam filter container with strainer 01-11 02-11 03-11
12 Adapter (outlet) 01-12 02-12 03-12
13 Adapter with air device 01-13 02-13 03-13
5 Foam filter 01-15 02-15 03-15
 

Home |  About Us |  Contact |  Dr. Aqua  |  Pond ProductsOn-line Store Front   |  koi Land

Copyright © 1998 Won Brothers, Inc.  All rights reserved.