AV 150 Air Pump
- Oil free design
- High air volume
- Solid aluminum body
- Powerful, Reliable
- Indoor or outdoor use
- Heavy rubber diaphragm
- Higher pressure
- Steady air flow
- Simple maintenance
- 20 feet power cable
- CE approved
- Koi ponds
- Fish culture systems
- In-store display fish tanks
- Laboratory
- Household
- Bubble bath
- Aerobic waste water treatment
- Liquid agitation
- Air driven protein skimmer
Important to know
- An air pump is a necessity for a pond or aquarium and serves many functions for fish and other aquatic life.
- Introduces oxygen into the water
- Provides quick and safe gas exchange, removing carbon dioxide and hydrogen sulfide.
- The upward movement of the air bubbles helps to circulate the water
- Water movement creates an ice free area during the winter
- Provides oxygen to beneficial bacteria (nitrifying bacteria) that help to break down waste.
PERFORMANCE DATA
- Air pump should be placed above the water level for maximum performance. If pump is positioned under the aquarium, a check valve must be prevent back siphoning of water during the power outage.
- To prevent possible electric shock, air pump must be installed in a clean and dry place.
- If the air pump accidentally falls into the aquarium, unplug the unit before retrieving it from the tank
- To avoid electrical shock, do not operate air pump if it has a damaged cord or a wet plug.
- Only use a proper rating extension cord when needed. A cord rated for less amperes or watts than the pump rating may over heat.
- Air pump is for indoor use only.
- To prevent damage to the air pump, air stones should be cleaned or replaced periodically.
- Make sure that your electrical voltage is the same as listed voltage on the label of the air pump
- Always use a properly grounded electrical outlet